www.e-autolifts.com      Hydraulic Mgt. Inc.      email us at: lifts @ e-autolifts.com  
The Auto Lift Shop
is OPEN
Hours:7 days a week
Click for HOME Page

Click here to see the Quick Jack

Car Lifts by BendPAK and

Ranger
Shop Equipment
 To place an order call us at 800-346-5331
Two Post Lifts Four Post Lifts Storage & Parking Lifts Alignment Lifts Low, Mid-rise & Portable Lifts Scissor Lifts Mobile Column Lift Motorcycle Lifts Rolling Bridges Power Units Shop Equipment Brake Lathes Tool Boxes and Benches Balancers Tire Changers Pipe Benders Optional Lift Accessories Installation Leasing Shipping Floor Requirements Useful Links Contact Us Home

  

 Semper Fi!
Vietnam - '67-'68

Billie
Head of Security

Wheel Balancer
Wheel balancing perfection from Ranger. After over a decade of developing our wheel-balance technologies, the Ranger DST Dynamic Wheel Balancer has reached the very pinnacle of reliability, repeatability and precision. The proven direct-axis drive system is accurate within hundredths of an ounce and guarantees that wheels are balanced, vibration-free.

DST Wheel Balancers feature better-than-necessary rugged construction, a heavy-duty steel body and solid electronics that you can depend on. Superior wheel balancer features like a simple ergonomic design, a complete accessories package, the direct-axis drive system and user-friendly settings management deliver quality you can count on.

DST Wheel Balancers remove all the guesswork from weight-placement. It only takes about 6 seconds for the DST Wheel Balancer to answer the only questions you care about: where and how much? Ranger DST Wheel Balancers even automatically calculate the minimum amount of weight needed to achieve an optimal balance for the tire and wheel configuration. Use less weight and save time!

Even though a DST Wheel Balancer will likely be the most sophisticated piece of equipment in your entire shop, we engineered it with a robust set of user-friendly features. After all, you're a tire and wheel specialist—you shouldn't have to be a computer engineer too. Our easy-to-read display panel and simple ergonomic controls let you and your technicians immediately jump into the action with minimal training. Your bottom line has never looked so good.

Browse and compare our full offering of Ranger Wheel Balancers with the handy slider at top of the page, or click on another product section using the navigation bar to see something completely different.

   
 
The Ranger DST2420 wheel balancer is a highly accurate and dependable no-frills balancer that features our proprietary Digital Sensor Technology for critical reliability and repeatability. From one-bay shops to high-volume tire stores, the DST2420 is built with a gritty toughness that puts out perfectly balanced wheels day after day, around the clock. Like all of our DST Series wheel balancers, it’s a zero tolerance performer that features our proven Direct-Axis drive system, accurate to within hundredths of an ounce ensuring wheels are balanced vibration-free.

The DST2420 automatically calculates the exact weight needed to achieve an optimal balance for almost every tire and wheel configuration on the planet and brightly displayed LED’s mark the exact amount and location in just six seconds. A full-menu of time saving features that includes Dynamic, Static, and Performance Alloy settings allow you to balance OEM wheel configurations and performance wheels with minimal effort and speed.

Digital Sensor Technology
Our highly accurate Digital Sensor Technology features a 16-digit digital signal processor and single-chip technology that increases productivity and offers unprecedented speed and accuracy - especially when using sophisticated balance and weight placement techniques required for newer high-tech OEM and aftermarket wheels.

Single-chip circuit board architecture provides an inherent performance and reliability advantage compared to multi-chip implementations of the same functionality. In addition to overall latency reductions, the single-chip architecture significantly boosts device throughput. An extremely fast dedicated hyper transport protocol allows data to communicate with the micro-processor at much faster speeds. This solution offers unmatched integration of features and functionality and results in lower power consumption and dissipated heat.

Multi-Directional Quartz Piezoelectric Load Sensors
The DST2420 uses highly precise dual-component piezoelectric quartz load sensors combined with a single digital rotation encoder that measure both longitudinal, transversal, and shear effects for multi-directional force unbalance detection. The piezoelectric force sensors used on the DST2420 are very sensitive and offer long-term stability and freedom from fatigue for a service life that is virtually unlimited. The high rigidity quartz crystal sensors result in very high frequency detection in all three directions of measurement.

FEATURES

Quick and Precise Set-Up
Multi-size center cones and a full rubber perimeter no-mar “Quick-Nut” bell adapter makes mounting wheels fast and easy and minimizes the risk of costly wheel damage.

Mounting Cone Package
The DST2420 tooling package not only includes our standard car and light truck cones, but a heavy-duty truck cone and spacer ring as well. This well equipped package includes three automotive and light truck cones; 1.75” - 2.75”, 2.75” - 3.50”, and 3.50” - 4.25”, and one truck cone 4.50” - 5.00”.

Weight Optimization
The DST2420 automatically calculates the minimum amount of weight needed to achieve an optimal balance for the tire and wheel configuration so you use less weight which adds up to real savings and increases your bottom line.
Wheel Graphic Interface
A touch-pad display panel features tire and wheel assembly graphics to help simplify speed entry of wheel data and helps guide technicians through balancing procedures. Operator function keys are labeled with simple, easy-to-read icons helping operators identify and command all balancing functions.

LED Rolling Wheel Weight Displays
Bright LED weight placement indicators show weight positions as the wheel is gently rolled to exact top-dead-center. Tiered weight placement indicators help identify out-of-sight weight placement such as split-weight or hidden “behind-the-spoke” techniques. Aids with clip-on, and tape weight placement at precise locations for zero-on balancing every time.

     
DST-2420      $1720        

•Motor: 1.5 hp / 110V/220V 50/60HZ 1Ph..
•Working temperature: -5C/27F - 50C/82F

•Drive system: belt drive
•Cycle time: 6 - 9 seconds (avg.)
•Balancing modes: dynamic / static / 3-alloy
•Top positioning weight locator: standard
•Inside & outside measuring: standard
•Millimeter / inches selection: standard
•Ounce / gram selection: standard
•Wheel offset distance setting: manual
•Self-calibration function: standard
•Auto start when hood is lowered: standard
•Wheel spin braking: automatic / electronic
•Wheel holding manual brake pedal: standard
•Centering cones included: 3 standard / 1 truck
•Truck cone / spacer ring adapter set: included standard
•Wheel calipers: standard
•Rear cone mount spring: standard
•No-mar rear cone mount pressure cup: standard
•Quick-release & mount hub nut: standard
•Maximum tire diameter: 47" / 1,194 mm
•Max tire weight: 145 pounds (65 kg)
•Max. wheel diameter: 10" - 24" / 254 mm - 610 mm
•Wheel width capacity: 2" - 18" / 51 mm - 457 mm
•Balancing increments: 0.25 or 0.01 oz
•Balancing speed: 180 rpm
•Accuracy: +/- 1 gram / .035 oz
•Resolution (round off mode): 0.01 ounce, 1.4°
•Shipping weight: 398 lbs. / 181 kg

RANGER DST64T WHEEL BALANCER
FEATURING AUTOMATIC WHEEL DATA ENTRY
$2570
Drive-Check™ Technology

The DST64T's Drive-Check technology dramatically improves rotational measuring typically used to diagnose and repair ride disturbance complications. The highly precise DST64T performs a computer generated driving simulation then checks and measures the tire / wheel assembly for imbalance and possible runout of the rim and tire. With the DST64T, virtually all possible complaints due to rotational imbalance are eliminated before the wheel is mounted on the vehicle. Click here for spec. sheet


THE Truck Wheel Balancer $6845

The Ranger RB24T truck wheel balancer is a heavyweight wheel balancer suited especially for high-volume commercial tire dealers and truck fleets. It handles tires up to 50 inches in diameter and 20 inches wide and rim sizes up to 30 inches in diameter. Although best suited for bus, truck and OTR wheels, it’s capable and fully equipped to accommodate automobiles and light truck wheels as well. Featuring Ranger’s proprietary Drive-Check™ technology, it’s a powerful, vibration detection balancing solution that simulates road and driving speed conditions and measures computer-generated imbalance of the tire and wheel assembly automatically. It then recommends the most cost effective weight optimization correction as needed which minimizes weight usage and maximizes productivity. An integrated wheel lift easily lifts the heaviest wheel assemblies for effortless mounting on the balancer. Click here for spec sheet.


 

 

 

 


Terms (better known as "the fine print")

Hydraulic Mgt. Inc, 8966 Stump Road, Minerva, OH  44657
© COPYRIGHT 2001 ALL RIGHTS RESERVED e-autolifts.com