www.e-autolifts.com      Hydraulic Mgt. Inc.      email us at: lifts @ e-autolifts.com  
The Auto Lift Shop
Hours:7 days a week
Click for HOME Page

Click here to see the Quick Jack

Car Lifts by BendPAK and

Shop Equipment
 To place an order call us at 800-346-5331
Two Post Lifts Four Post Lifts Storage & Parking Lifts Alignment Lifts Low, Mid-rise & Portable Lifts Scissor Lifts Mobile Column Lift Motorcycle Lifts Rolling Bridges Power Units Shop Equipment Brake Lathes Tool Boxes and Benches Balancers Tire Changers Pipe Benders Optional Lift Accessories Installation Leasing Shipping Floor Requirements Useful Links Contact Us Home


 Semper Fi!
Vietnam - '67-'68

Head of Security


The Garage Lift For Restorers & Hobbyists



    Space-Saving Four Post Models for Servicing Automobiles and Light Trucks
  • Model HD-ST Narrow Width
  • Model HD-9 Standard Width
  • Features...
  • 9000 lbs lifting capacity
  • Optional Caster Kit available
  • Freestanding Design
  • Dual-position runways accommodate wide or narrow vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed cable sheaves
  • Internal "anti sway" slider blocks in each column
  • Pneumatic push-buttom safety release
  • Features heavy-duty 3/8" aircraft cable
  • Longer approach ramsp for low ground clearnace vehicles
  • Safety locks enclosed in columns minimize pinch points
  • Oversize sheave diamter reduces cable fatigue
  • Rugged, sel-lubricating cable sheaves combined with 1-1/4" sheave axles are fully enlosed
  • Multi-position safety locks in each column
  • Designed to meet ANSI standars
  • Approach ramps can be removed for added drive under clearance
  • Independent "back up" slack-cable safety latches
  • Optional drive thru ramps available
  • Optional solid deck increases storage capacity



HD-9 Series
These HD-Series FREE STANDING** lift models were designed and built for car aficionados who appreciate quality and value. Not just quality design but quality workmanship throughout and not value as in "cheap", but value as getting a lot more bang for your buck. Sure, we could have made them cheaper, but then they'd be like all those non-certified hobby lifts on the market. Please don't mistake these lifts for so called "hobby lifts". Bend Pak's engineers would be offended. These full-blown lift models come packed with features that until now were found only on commercial-grade designs. Better yet, they're built and backed by a comapny with over 35 years in the business. We're proud to have these lifts in our lineup because they have one thing in common with our great reputation. Both carry a lot of weight. BECAUSE THE LOCKS OPERATE WITH AIR, YOU MUST HAVE AN AIR COMPRESSOR. A SMALL ONE WILL DO THE JOB. IT SHOULD HAVE A PSI OF 90.**Anchor bolts come with the lift if you'd like to bolt it down.
Click on model # for floorplan 
Style Standard $2850 Wide $2895 High $2985 High/Wide $3035
Lifting Capacity 9000lbs   9000lbs   9,000lbs   9,000lbs  
Overall Width 103-3/4"   120-3/4"   103-3/4"   120-3/4"  
Outside length 174"   174"   198"   198"  
Overall Length 200"   200"   224"   224"  
Height of Columns 88"   88"   100"   100"  
Min. Runway hgt. 4-1/2"   4-1/2"   4-1/2"   4-1/2"  
Max Rise 70"   70"   82"   82"  
Lifting hgt. 74-1/2"   74-1/2"   86-1/2"   86-1/2"  
Width btwn posts 89-3/4"   106-3/4"   89-3/4"   106-3/4"  
Runway Width 19"   19"   19"   19"  
Width btwn runways 37-1/4"   37-1/4"to 44"   37-1/4"   37-1/4" - 44"  
Length of runways 164"   164"   188"   188"  
Lifting time 45-60 seconds   45-60 seconds   50 Seconds   50 Seconds  
Standard Motor 220VAC/60Hz. 1 ph   220VAC/60Hz. 1 ph   220 VAC / 60 Hz. 1Ph   220 VAC / 60 Hz. 1Ph  
Weight 1560 lbs   1600 lbs   1660 lbs   1700 lbs  


Model Selection

OPTIONAL ACCESSORIES  Sale prices on accessories only valid when purchased with an HD-9 series lift.
You'll need to call us at 800-346 5331 if you wish to purchase these accessories without purchasing a lift. They can't be bought on-line.

Caster Kit
$275 w/purchased with lift Optional casters make the lift fully portable.
(+ shipping w/o lift)
Solid Deck Option-removable for under car access

$885, $975, $995 depending on lift model

(+ shipping if not purchased w/lift)

Sliding Jack Tray-sits on your runways for use with a bottle jack
. (may not work with low profile cars)
$145 w/purchase of lift (+shipping w/o lift)
Telescoping Sliding Jack Tray
Rolling Bridge Jack Rollers fit in runways
Oil Drip Pans - keeps fluids from dripping on vehicle underneath
$55 w/ purchase of lift ( + shipping w/o lift) Plastic trays (set of two)

Air Electric Work Station
The industrial grade Utility Station is designed to eliminate the problems found in a commercial grade box.


$285 fits 2 post - $295 fits 4 post


.Freight is delivered by common carrier to tailgate of truck.  It is the customer's responsibility to take the freight off the truck. If you've got a tow truck or a tilt bed, you're home free!  You can also pick the equipment up at your local terminal and they'll put it in your car trailer.  Delivery time is approx. 7--10 days.

800-346-5331 to order.  We take AMEX, VISA, Master Card, Discover, company and personal checks.

Click here to see a comparison between the BendPak® and the Back Yard Buddy




Terms (better known as "the fine print")

Hydraulic Mgt. Inc, 8966 Stump Road, Minerva, OH  44657