Mid-Rise Scissor Lifts for Service Bays and Home Use

VD September 09 2021

There was a time when the only way to work on a vehicle was jacking it up the vehicle on one side, sliding under it, and then assuming that gravity will not be overcoming the jack. Over time, innovations made the mechanic’s job easier and safer, and the mid-rise scissor car lift is one of these innovations. It is used to raise the vehicles when one needs to carry them out on the underside.

A scissor lift can lift a vehicle as heavy as SUV and allow work to be done safely underneath it. Whether you have an auto repair shop or you are to restore a classic car, this is a piece of crucial equipment that you should never do without. There are also portable mid-rise lifts available in the market and are considered more convenient, but out of different types of lifts, the best mid-rise lift can meet or even exceed your lifting requirements.

What is a mid-rise scissor lift?


A mid-rise scissor lift is a lifting platform that uses a set of hydraulically powered scissors to raise and lower the platform. It is typically used to raise people or materials to an elevated work area, such as a mezzanine level. Mid-rise scissor lifts are available in both electric and manual versions.

The scissors mechanism on a mid-rise scissor lift consists of a set of interlocking metal plates that are linked together by hinges. When the lift is in use, hydraulic fluid is pumped into the cylinders located at each hinge. This fluid pressure extends the length of the hinge, which in turn raises the platform. To lower the platform, the hydraulic fluid is released from the cylinders and allowed to return to a storage tank.

What are the main types of mid-rise scissor lifts?


The three main types of mid-rise scissor lifts are electric, gas-powered, and diesel-powered. Each type has its own advantages and disadvantages that make it better suited for certain applications than others.

Electric scissor lifts are the most popular type of lift because they are clean, quiet, and easy to operate. They are ideal for indoor applications where noise and emissions are a concern. However, electric lifts have shorter run times than gas or diesel models and may not be suitable for outdoor use.

Gas-powered scissor lifts have the longest run times of any type of lift, making them ideal for outdoor use. They are also more powerful than electric models, so they can handle heavier loads. However, gas-powered lifts are noisy and produce emissions, so they are not ideal for indoor use.

Diesel-powered scissor lifts are the most powerful type of lift, making them ideal for heavy-duty applications. They also have the longest run times of any type of lift. However, diesel-powered lifts are expensive and may not be suitable for indoor use due to noise and emissions.

Mid-rise scissor lifts typically have a lifting capacity of between 1,000 and 4,000 pounds (450 kg to 1,800 kg). They are available in a variety of sizes and can be used indoors or outdoors. Some models are designed for rough terrain, while others are suitable for use on smooth surfaces such as concrete floors.

What is the weight capacity of mid-rise scissor lifts?

There are three main types of mid-rise scissor lifts:

1. Standard mid-rise scissor lift – This type of lift typically has a lifting capacity of around 2,000 pounds and can raise a vehicle to a height of approximately four feet.


2. Extended mid-rise scissor lift – This type of lift has a lifting capacity of around 4,000 pounds and can raise a vehicle to a height of approximately six feet.


3. Jumbo mid-rise scissor lift – This type of lift has a lifting capacity of around 6,000 pounds and can raise a vehicle to a height of eight feet or more.


Features and benefits of a mid-rise scissor lift

Easy to move

A number of portable mid-rise scissor car lifts have wheels, thus making it relatively easy for them to move around. The wheels' design is made so that they can easily slide on and off while they are also locked in for safety. The best mid-rise lift may have an optional tow apparatus joined to it and designed to make it much easier to move.

Secure locking mechanism

Almost all the mid-size scissor lifts are designed by keeping the safety of the operator in mind. There is a safety locking mechanism in each of the lifts which will lock the vehicle scissor lift at the desired height. This way, anyone who works underneath the vehicle gets safeguarded, as the lift prevents it from being lowered inadvertently.

Hydraulic lift

The most stable scissor lifts found in the market are hydraulic lifts, but it is worth noting that they are generally exposed to caustic substances or some extreme environments. The best mid-size lift gets fitted with a protective cover in order to keep the hydraulic piston safe from any corrosion.

Low profile with a 3-inch minimum lift

It has been noticed that various high-end and exotic cars have relatively low ground clearance. A low-profile mid-rise scissor lift enables such vehicles to be positioned over the lift and then raised to the preferred working height.

How To Choose Perfect Mid-Rise Scissor Lift for Service Bay and Home Use

There are many factors you need to consider when choosing the perfect mid-rise scissor lift for your service bay or home garage. First, you need to determine the lifting capacity that you require. The next thing to consider is the platform size. You also need to decide on the power source- electric or pneumatic. Lastly, you need to check the safety features of the lift.

  • Lifting capacity is one of the most important factors to consider when choosing a mid-rise scissor lift. Make sure to pick a lift that can accommodate your vehicle. If you have a light-duty vehicle, then you can go for a smaller capacity lift. However, if you have a heavy-duty vehicle, then you need to choose a lift with a higher lifting capacity.
  • The platform size is also an important consideration. You need to make sure that the platform is big enough to accommodate your vehicle. If you have a small vehicle, then you can go for a smaller platform. However, if you have a large vehicle, then you need to choose a bigger platform.
  • The power source is another important consideration. If you want an electric lift, then you need to make sure that the power outlet is readily available. However, if you want a pneumatic lift, then you don't need to worry about the power outlet.
  • Lastly, you need to check the safety features of the lift. Make sure that the lift has a safety stop and an emergency stop button. You also need to make sure that the platform is easy to operate.

The best mid-rise scissor lift models



When you plan to add productivity as well as versatility to your home garage or a professional shop, then MD-6XP can be your ideal choice. This is the best mid-rise lift with a capacity of 6000 lb. designed to easily fit into the narrower bays by not taking much of your floor space.

Because of the small footprint, shops with small work areas can benefit from their ability to be placed in any space without getting in your way. This scissor lift is well-equipped with adjustable arm assemblies and a multipurpose safety lock bar to give dynamic flexibility to your lifting jobs and to get the best possible results.




This open-center mid-rise lift is indeed a mechanical marvel. An experience of several years has made it possible for the manufacturers to design a lift that can safely connect to the OEM points of any vehicle. This is a car lift with more extended platforms, which means that you can lift more types of vehicles than before.

Some auto shops risk the well-being of the vehicles and personnel’s personal safety because the lifts are not able to reach the OEM points fully. MDS-6LP has corrected this problem through its longer platforms. The extended lift point spread is helpful for vehicles with long wheelbases, so they can be raised safely.




You can confidently choose the MDS-6LPF if you want to flush-mount the lift on the floor to get a smoother sub-surface installation. Its features are pretty the same as the MDS-6LP, but its space-saving flush-mount design can be the best way to keep your garage lift equipment parallel with the flooring.

The lift gets powered from its zero-foot point to the top in just around 45 seconds. This is an extra boost helpful to make sure an even lift in the starting inches, and then the hydraulics will take over from there. Other than that, it has four hydraulic cylinders, safety lock bars of solid steel, and cushioned and durable rubber contact blocks.




We can see the arrival of the next generation of electric vehicles, and these vehicles' lifting points are quite different from the usual ones. MDS-6EXT mid-rise lift has kept a long-wheelbase as its point of reference and has been designed for more extended lift points accommodation that can reach the extreme edges of a vehicle in a better way. MDS-6EXT can maintain an open-center design that resembles other MDS models.

Final Words

You must buy a mid-rise scissor lift designed and manufactured from materials of the highest quality to stand working rigors in a busy garage environment. The best mid-rise lift can cater to a wide range of vehicle sizes and types. The portable mid-rise lift is made so that you can plug it anywhere, and it is suited for both domestic and commercial purposes because it can be easily stored due to its low profile.


Is a mid-rise scissor lift safe?

Several car enthusiasts have mid-rise scissor lifts in their garage and not a two-post lift of a full size. A mid-rise scissor lift is considered very safe, and therefore, if you get one, it will not be causing you to sacrifice anything like safety, capability, and ease of use.

Why are mid-rise scissor lifts becoming popular?

The mid-rise scissor lifts are much more versatile and safer than any other car lift. Besides this, they are ideal for home use, workshops, tire bays, and detailing shops. They are primarily portable and have a capacity of around 3 tons, although there are also some heavy-duty models out there. 

Which mid-rise scissor lift is the best?

There is no doubt that scissor lifts are very reliable and a great choice that depends on your requirements. The MD-6XP by BendPak is one of the best in the market with a weight capacity of 6,000 lbs. and can lift the majority of cars and light trucks.